HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

halting power on rp4440

 
Paul Clark_9
Advisor

halting power on rp4440

When I run :-
shutdown -yh 0
as root from / directory the server shuts down but does not go to standby mode, i.e the power is still on with a solid green light. Is there a gsp command to halt power as well as the server. My rp 8420 and 3440 both power down with this command.
14 REPLIES 14
Luk Vandenbussche
Honored Contributor

Re: halting power on rp4440

Hi,

The GSP command is PE

Here you can choose to power OFF / power on
Gavin Clarke
Trusted Contributor

Re: halting power on rp4440

On the very rare ocassions that we shut ours down we have to press the power button for a while.

More like a K class shutdown.

It would be nice for them to just power off.

I'm not aware of any GSP command that switches off.

Cheers.
Gavin Clarke
Trusted Contributor

Re: halting power on rp4440

Well, I'm always learning.

Thanks Luk, your answer is better than mine.
Paul Clark_9
Advisor

Re: halting power on rp4440

Hi Luk,

There is no PE command for the rp4440 gsp.

Hi Gavin,

Thanks for the response, just a shame really as my other two boxes power down with the shutdown -hy 0 command.

Anyone else?
Domenico_5
Respected Contributor

Re: halting power on rp4440

hi

fro gsp use PC (Power Cord) to turn off or on your server

Luk Vandenbussche
Honored Contributor

Re: halting power on rp4440

Hi,

Your right is it PC.
I made a mistype with cell board based servers
Lee Harris_5
Valued Contributor

Re: halting power on rp4440

PC (Power Control) will let you turn off power from the GSP console (soft power-off). You can check the state of the physical power switch and power state of the system generally by issuing the PS (Power Status) command from the MP/GSP console.
Gavin Clarke
Trusted Contributor

Re: halting power on rp4440

Just for reference

GSP commands:

HE - Help
LI - List Commands

Cheers.
Paul Clark_9
Advisor

Re: halting power on rp4440

so what were saying is that there is no way of halting the power on the rp4440 with changing something in gsp?

is there any other way as the shutdown -yh 0 command does halt power? maybe a config when you interrupt boot?

seems strange that halting power with shutdown command doesn't really halt power, unlike other models.