HPE 9000 and HPE e3000 Servers
1748255 Members
3940 Online
108760 Solutions
New Discussion юеВ

how to install Fibre Channel Adapter A3591A into J2240 server

 
Hoang Nguyen_1
New Member

how to install Fibre Channel Adapter A3591A into J2240 server

After installing and configuring the A3591A into J2240 server, I connect server to a Storage Tek disk arrays
through an access HUB.

" ioscan -fn " does show the Fibre Channel Adapter Card but not the disks.

What else I need to do ?
Do I need to install a particularly patch fot this card?

I have 4 other k570 and a N4000 servers hooked up to STK disk arrays the same way but I don't get any problems only the J2240.

MORE INFORMATION:

Server J2240 with A3591A Fibre Channel Adapter Card
OS: hpux 11.0 64 bits
patches : All support plus bundles Including Diag bundle
Disk Arrays: Storage Tek 9145/9140
Access Hub: STK Storage Net

Run ioscan -fn
fc 0 10/12 fcT1 CLAIMED INTERFACE HP Fibre Channel Mass Storage Adapter
lan 1 10/12.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl
/dev/fcms1
fcp 0 10/12.8 fcp CLAIMED INTERFACE FCP Protocol Adapter



2 REPLIES 2
Vincenzo Restuccia
Honored Contributor

Re: how to install Fibre Channel Adapter A3591A into J2240 server

PHKL_21381 B.11.00.AA Fibre Channel Mass Storage Driver Patch
Denver Osborn
Honored Contributor

Re: how to install Fibre Channel Adapter A3591A into J2240 server

Are there any messages in /var/adm/syslog/syslog.log for fc?