hp 9000 rp7420 server specification

[Dennis Handly]

>Prashant: #getconf KERNEL_BITS (It helps if you spell it correctly. :-)

It is a waste of time doing this. The answer is always 64 on all but very old servers.
http://docs.hp.com/en/5991-6552/ch02s03.html#babcjdai

[tareq_2]

hi
im not intrested to know my system is 64 or 32 ...
just i want to know ,cpu speed, ram capacity,Hard drive, just these simple specs.
thanks

[Torsten.]

The command

# /opt/ignite/bin/print_manifest

will give you many useful information.

Example:

System Hardware

Model: ia64 hp superdome server SD64B
Main Memory: 654328 MB
Processors: 96
OS mode: 64 bit
...
LAN hardware ID: 0x000000000000
LAN hardware ID: 0x000000000000
LAN hardware ID: 0x000000000000
...
Storage devices HW Path Interface
COMPAQ BD3008A4C6 286102 Mb 0/0/1/1/0.0.0 SCSI Ultra320 A6961-60011

COMPAQ BD3008A4C6 286102 Mb 0/0/8/1/0.4.0 SCSI Ultra320 A6961-60011

COMPAQ BD3008A4C6 286102 Mb 0/0/8/1/0.3.0 SCSI Ultra320 A6961-60011
...







Running

SAM -> performance monitors -> system properties

will tell you model and speed of the CPU.




Running

# parstatus

will tell you about complex details of cell-based servers.

[Mustafa Gulercan]

hi,
i have attached sysinfo script which have talked before.

regards,
mustafa

[tareq_2]

thanks for all