hp9000 : Getting HEX chasis code : not booting .

[rveri]

Hi Experts,

I am getting the below hex codes after system is powered on. And its going for ever...long time , may be 1hr .. before gets PDC..

What could be the problem..?

System : L class, HP9000


processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
---------------------------------------------------------------

Thanks in advance,

[Torsten. · Accepted solution]

FxyF codes are normal runtime indicators - no error at all.

Something in GSP system logs?

[Matti_Kurkela]

FxyF chassis code means that HP-UX _is_ running. At this point, you have already gone past the PDC.

The x digit is a coarse indication of system load; the y digit indicates the number of CPUs.

F04F = your 4-CPU server is idling.

1F00 is also an indication of normal functioning, not an error.

MK

[rveri]

Thanks guys , I was watching on the live vfp mode, and not the console,