HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

hp9000 : Getting HEX chasis code : not booting .

 
SOLVED
Go to solution
rveri
Super Advisor

hp9000 : Getting HEX chasis code : not booting .

Hi Experts,

I am getting the below hex codes after system is powered on. And its going for ever...long time , may be 1hr .. before gets PDC..

What could be the problem..?

System : L class, HP9000


processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
processor display_activity() update 1F00
processor legacy PA HEX chassis-code F04F
---------------------------------------------------------------

Thanks in advance,
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: hp9000 : Getting HEX chasis code : not booting .

FxyF codes are normal runtime indicators - no error at all.

Something in GSP system logs?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Matti_Kurkela
Honored Contributor

Re: hp9000 : Getting HEX chasis code : not booting .

FxyF chassis code means that HP-UX _is_ running. At this point, you have already gone past the PDC.

The x digit is a coarse indication of system load; the y digit indicates the number of CPUs.

F04F = your 4-CPU server is idling.

1F00 is also an indication of normal functioning, not an error.

MK
MK
rveri
Super Advisor

Re: hp9000 : Getting HEX chasis code : not booting .

Thanks guys , I was watching on the live vfp mode, and not the console,