HPE 9000 and HPE e3000 Servers
1748256 Members
3814 Online
108760 Solutions
New Discussion юеВ

if I want to add cpu to N-class server

 
hongjing_zhang
Trusted Contributor

if I want to add cpu to N-class server

one cpu ok or two cpu
7 REPLIES 7
Sanjay Kumar Suri
Honored Contributor

Re: if I want to add cpu to N-class server

Need based. Use
sar -u 1 5

to monitor CPU activity. GlancePlus can also be used.

sks

A rigid mind is very sure, but often wrong. A flexible mind is generally unsure, but often right.
hongjing_zhang
Trusted Contributor

Re: if I want to add cpu to N-class server

I mean I need add dual or singular cpu once
Sanjay Kumar Suri
Honored Contributor

Re: if I want to add cpu to N-class server

Have a look at the link:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=353626

sks
A rigid mind is very sure, but often wrong. A flexible mind is generally unsure, but often right.
Senthil Kumar .A_1
Honored Contributor

Re: if I want to add cpu to N-class server

hello zhang,

no offence please.Your question is so misleading.If the responders take their precious time in analysing and answering in the most appropiate and clear manner, as a questioner you need to spend some extra time framing your quistion in a non ambiguous way...that is if you are really intrested in solving your problem.....


regards
senthil
Let your effort be such, the very words to define it, by a layman - would sound like a "POETRY" ;)
G. Vrijhoeven
Honored Contributor

Re: if I want to add cpu to N-class server

Hi,

In a N-class it is possible to add one CPU. in a RP74X0 class you must add CPU's in pairs.

HTH,

Gideon
Vincent Farrugia
Honored Contributor

Re: if I want to add cpu to N-class server

Hello,

In N-Class AND rp7400, you can add 1 CPU at a time. Make sure you add it/them in order. Also, make sure that you have adequate processor support modules to support CPUs. These handle 2 CPUs at a time. If, for example, you have 4 CPUs and you need to add another one, you need to add a processor support module as well.

rp7410 supports hardware partitioning... only that needs to be added CPUs in pairs. rp7400 and N-Class are pretty much the same, except for faster CPUs for rp7400.

HTH,
Vince
Tape Drives RULE!!!
Shaikh Imran
Honored Contributor

Re: if I want to add cpu to N-class server

Hi,
You can carry on with one cpu also but,
pls take care it meets the requirement of
PSM ( Processor Support Modules)

Regards,
I'll sleep when i am dead.