lanconsole password lost

[Christian Marquardt_1]

Hello,
does anyone know which are the standard passwords for the lanconsole on a hp9000 n-class or can I change it as user root?

Regards
Christian

[Sergejs Svitnevs]

check out the following link:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1106037462240+28353475&threadId=3116


Sergejs

[Peter Godron]

Christian,
what do you mean by password for the lansole? Is this the password for GSP?
Otherwise, if the root password is locked and console is locked:
1. Boot into single-user and reset the root password. "Ctrl-B" at /dev/console then RS. Interrupt boot,boot primary, interact with ISL, and "hpux -is".
2. Edit /etc/securetty and add one line containing the word console.
Regards

[Slawomir Gora]

Hi,

for GSP reset password loot at:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=41430

[Christian Marquardt_1]

Peter ... what is the GSP? I think it's the same. I thought there are standard passwords which are configured in time of machine installation like username "Admin" with password "Admin". I know this username-password-combination from another hp/ux machine (rp4440).

regards
Christian

[Ravi_8 · Accepted solution]

Hi,

there will not be any password set for lanconsole

press ctrl+b
login:
passwd:
press for both login and passwd
now you get gsp prompt
gsp> lc

now you are in lanconsole mode, you can configure,edit or delete.

[Christian Marquardt_1]

Hi Ravi,
right now I've tried pressing return for username and password. It works. The simpliest ...
Thanks a lot for the help.

kind regards
Christian