HPE Community
HPE 9000 and HPE e3000 Servers
1752761 Members
5188 Online
108789 Solutions
New Discussion

n-par

 
ASIFKHAN
Frequent Advisor

‎10-28-2007 10:30 PM

‎10-28-2007 10:30 PM

n-par

how to create n-par along with firmware upgrade?can anybody tell me simply steps along with commands??
0 Kudos
1 REPLY 1
Torsten.
Acclaimed Contributor

‎10-28-2007 10:34 PM

‎10-28-2007 10:34 PM

Re: n-par

Depending on the type of server you should consider to ask HP support to upgrade the servers firmware.

For configuring nPars you should refer to
man parmgr
or use the system management homepage as GUI

your.server.i.p:2301/parmgr

Have at look at nPartition Administrator's Guide:

http://docs.hp.com/en/5991-1247B/index.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.