HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

n4000 attn light blinking amber..

 
golfnut
Frequent Advisor

n4000 attn light blinking amber..

WE have an HP N class server runing HP - UX 11.0.
The server has a attn light, on the front panel, that is blinking (amber).

The server is up and running and have been rebooted a couple of times and it comes back fine.

Are there any logs that I can check to see whta that problem is. syslog does not give me any thing useful.

thanks


p.s where can i find docs for this sever.


4 REPLIES 4
Slawomir Gora
Honored Contributor

Re: n4000 attn light blinking amber..

Hi,
you should look at GSP logs from terminal console.

Procedure is:
1. From console press CTRL-B
2. Search logs by command sl
3. Select Error
4. No filter

q - to exit logs
co - return to console
Robert-Jan Goossens
Honored Contributor

Re: n4000 attn light blinking amber..

Hi,

Check this link for the docs. (rp7400/n-class)

http://www.docs.hp.com/en/hw.html#rp7400%20Server%20(N-Class)

Regards,
Robert-Jan
golfnut
Frequent Advisor

Re: n4000 attn light blinking amber..

You said....

you should look at GSP logs from terminal console.

Procedure is:
1. From console press CTRL-B
2. Search logs by command sl
3. Select Error
4. No filter

q - to exit logs
co - return to console


Is this to be done when the server is down? or can i do ctrl b on a live system...
thanks
Ranjith_5
Honored Contributor

Re: n4000 attn light blinking amber..


Sure, you can do this on a live systems console.

Regards,
Syam