HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

npar on rp7410 and Ignite

 
SOLVED
Go to solution
Slawek Ksiazek
Regular Advisor

npar on rp7410 and Ignite

Hi

I need help because, i have rp7410 with two npar, (first npar only 11.23)(second npar (vpar1 an vpar2, but on vpar1 i have ignite server)a also i have assign DVD drive to second npar,now i have reinstall first npar and i looking information how can i reinstall my first npar from Ignite server,if it is possible and how can I do it because when i try do it i have information:
//Main Menu: Enter command or menu > bo lan 9.156.xx.yy INSTALL

BCH Directed Boot Path: 0/0/8/0/0/4/0.


Do you wish to stop at the ISL prompt prior to booting? (y/n) >> y

Initializing boot Device.


Boot IO Dependent Code (IODC) Revision 4


IODC ENTRY_INIT failed. Error Status: -4

The IODC for this boot device was unable to provide text describing the failure.
IODC ENTRY_INIT[Return Messages] failed. Error Status: -2

0x0000 0000000000000000 0000000000000000 0000000000000000 0000000000000000
0x0004 0000000000000000 0000000000000000 0000000000000000 0000000000000000
//

Today and also instaled vpar (vparboot -p vpar1n1 -I 9.156.xx,yy,/opt/ignite/boot/Rel_B.11.23/WINSTALL) from Ignite (golden_image) and i havn,t any problem


Please help me,

Slawek
5 REPLIES 5
Eric SAUBIGNAC
Honored Contributor

Re: npar on rp7410 and Ignite

Bonjour Slawek,

As usually with ignite you must check some basic things :

- are both npar on the same subnet
- on the vpar ignite server, how is configured the file /etc/opt/ignite/instl_boottab
- do you find those lines in /etc/inetd.conf :

tftp dgram udp wait root /usr/lbin/tftpd tftpd\
/opt/ignite\
/var/opt/ignite

instl_boots dgram udp wait root /opt/ignite/lbin/instl_bootd instl_bootd

Eric
Slawek Ksiazek
Regular Advisor

Re: npar on rp7410 and Ignite


Thanks for answer
If I boot from BCH how can I check lan settings ?Thanks

Slawek
likid0
Honored Contributor

Re: npar on rp7410 and Ignite

If you don't have any system installed on that npar you will have to boot from dvd and then check your parameters.

If you have so installed on that npar, boot it up and you can check out network, after testing the network if you have the 1st npar on a different subnet,try the bootsys command from the ignite server,
check it out:

man bootsys
bootsys reboot and install clients using Ignite-UX
Windows?, no thanks
likid0
Honored Contributor
Solution

Re: npar on rp7410 and Ignite

I see you haven't assigned any points:

I have assigned points to 0 of 8 responses


Please take your time and if any of the answers have helped you please assign points.

Thnx
Windows?, no thanks
Slawek Ksiazek
Regular Advisor

Re: npar on rp7410 and Ignite

Thanks for all

now works fine :-) Apropos Ignite is smililar to NIM


Slawek