power supply check

[arun m govind]

Hi,

I want to check my servers powersupply status from OS level.It is hp-ux 11.11i os on rp3440 server.what is the command????

[Andrew Rutter]

arun,

login to the MP and issue this command

ps

this will give you power and fan status

Andy

[Robert-Jan Goossens]

Hi,

Or install ems and do a full check (its free)

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Robert-Jan

[Asif Sharif]

HI Arun,

You can check your hardware status from either MP or OS.

For OS you need to install EMS software,if you have installed then go through the below link.
http://docs.hp.com/en/diag/ems/ems_test.htm#begin

BTW you can easily check power supply and FAN status with the help of MP.

[testserver2] MP> cm



(Use Ctrl-B to return to MP main menu.)



[testserver2] MP:CM> ps


PS
System Power state: On
Temperature : Normal


Power supplies | Fan
# State Type | States
-----------------------------------------------------------
0 Normal Type 0 | Normal
1 A/C Disconnected or Out of Range Type 0 | Normal
2 - - | Normal
3 - - | Normal
4 - - | Normal
5 - - | Normal
6 - - | Normal
7 - - | Normal


[testserver2] MP:CM>

Regards,
Asif Sharif

[Asif Sharif]

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=985613