HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

problem in booting

 
T G Manikandan
Honored Contributor

problem in booting

Hello,
First of all.
A deep prayer for the families who had a very bad day at US.

1)the system does not boot.It gives the following error.
SYSTEM NAME: uninitialized
DATE: 12/19/2000 TIME: 23:18:45
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

REASON FOR ALERT
SOURCE: 6 = platform
SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

LEDs: RUN ATTENTION FAULT REMOTE POWER
OFF FLASH ON OFF ON
LED State: Boot Failed. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x000010F0600010F0 00000000 00000000 - type 0 = Data Field Unused
0x580018F0600010F0 0000640B 1317122D - type 11 = Timestamp 12/19/2000 23:18:45
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:A
*****************************************

Also a
Source 8 =I/O
System bus adapter
function failure.

2)What is the reason for this?
This is a L2000 server.


Can someone help me reg. this.
Thanks
G Manikandan
5 REPLIES 5
Sridhar Bhaskarla
Honored Contributor

Re: problem in booting

Manikandan,

You need to consider two things

-Upgrade the PDC to the latest version
-Change the power monitor. L-class seems to have an inherent problem with the power monitor cards.

Now to boot your system, take out the power cables and put them back.

Run stm once the system comes backup and check for the chassis logs

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
Sanjay_6
Honored Contributor

Re: problem in booting

Hi TG,

My guess is, It looks like either the boot path is not specified or the bus controller on which the boot disk is there is having some problem. Check for the boot path in the boot screen, try manually booting the system by interfacing with the IPL.

You can try the solution offered by Sridhar too. Might be he is right.

Hope this helps.

Thanks
Thayanidhi
Honored Contributor

Re: problem in booting

Hi Manikandan,

I had similar problem and I found it is problem of Processor support module. You have replace processor support module along with Main board.

Regds

TT
Attitude (not aptitude) determines altitude.
Jayan_2
Advisor

Re: problem in booting

Hi Mani,

I agree with Sanjay.First check the boot path and also see any one is changed the hotswappable LVD Hard disks from one slot to another in the system.

hth
jinu
Work whole souled so as to god
T G Manikandan
Honored Contributor

Re: problem in booting

This is a very old thread!

2 years back!!