HPE Community
HPE 9000 and HPE e3000 Servers
1753894 Members
7675 Online
108809 Solutions
New Discussion юеВ

Re: problem in console

 
Bill Hassell
Honored Contributor

тАО12-08-2009 04:42 AM

тАО12-08-2009 04:42 AM

Re: problem in console

Which serial cable did you use? A modem cable will not work. You must use a crossover cable, also known as a printer cable. Depending on the server, you need to plug it into the console port or the console connector on the "W" cable. You can't plug a 25pin terminal cable into the multi-purpose 25pin connector on newer systems -- you must use the "W" cable.


Bill Hassell, sysadmin
0 Kudos
Torsten.
Acclaimed Contributor

тАО12-08-2009 04:46 AM

тАО12-08-2009 04:46 AM

Re: problem in console

Can you get access to the MP itself?

Did you see

MP login:

and are you able to logon to the MP?


Just no action on the (CO)nsole possible?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Jacques Carriere
Regular Advisor

тАО12-09-2009 08:53 AM

тАО12-09-2009 08:53 AM

Re: problem in console

If a GSP reset doesn't do it and without knowing why type of server you have, you might not be using the right comm port, and/or wrong cable, etc,...



Jacques
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.