HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

programming a Board ID CompaqSmart P, 2CH Wide-SCSI

 
kleiner-traum
Occasional Visitor

programming a Board ID CompaqSmart P, 2CH Wide-SCSI

First :
Excuse my very bad english !

Now my Question: I have a Compaq Smart /P, 2Channel Wide-SCSI adapter. When I build it in my little Proliant 400 Server to build a SCSI Raid, I get a error message : 1783-Drive Array Controller Failure (Board ID not Programmed).

What do I wrong? And how can I programme this Board ID

Thank You very much for possibly help
3 REPLIES 3
JohnWRuffo
Honored Contributor

Re: programming a Board ID CompaqSmart P, 2CH Wide-SCSI

Error 1783 points to a ROM failure:

You can try installing a new ROM: http://h18007.www1.hp.com/support/files/storage/us/download/14694.html

The ROMPaq disk you need is Disk 1 (version 4.50) and it can take a few minutes to get throught the detection phase as well as through the bios update. Be patient with it.

If you cannot get a response during the bios detection, it is likely that the Array Controller is lost.

G'luck!
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
kleiner-traum
Occasional Visitor

Re: programming a Board ID CompaqSmart P, 2CH Wide-SCSI

Thank You very much.I had try to find this art of software. But I can't found it.Excuse that I post in the wrong cathegory. I have to learn to use this forum.

Thanks a lot. I send a message when i had repaired the controller.
JohnWRuffo
Honored Contributor

Re: programming a Board ID CompaqSmart P, 2CH Wide-SCSI

Let us know if you need any other help? -john
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt