HPE Community
HPE 9000 and HPE e3000 Servers
1753770 Members
5180 Online
108799 Solutions
New Discussion

Re: "Saving" rp8400 complex configuration info for easy restoration

 
john guardian
Super Advisor

‎09-16-2005 02:01 AM

‎09-16-2005 02:01 AM

"Saving" rp8400 complex configuration info for easy restoration

Q: I have several jr sysadmins who'd like to "play" w/2 rp units that I have as "spares". It's been several years since I took the N/Vpar RAIL course, but I seem to remember that there was some way to create a machine readable file that could be used to restore the npar config in a complex once someone has executed the "CC" cmd from the GSP command menu. As an aside, isn't there also something similar for restoration of the vpar config on any given NPAR as well.

Thanks.

JM
0 Kudos
1 REPLY 1
Torsten.
Acclaimed Contributor

‎09-16-2005 09:48 PM

‎09-16-2005 09:48 PM

Re: "Saving" rp8400 complex configuration info for easy restoration

Hi Joe,

you can use "CC" to restore the last config.

more details here:

http://www.docs.hp.com/en/5991-1132/ch06s03.html

For both (npar/vpar) the config isn't really difficult to create, so save and store the config in your documentation.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.