HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

"Saving" rp8400 complex configuration info for easy restoration

 
john guardian
Super Advisor

"Saving" rp8400 complex configuration info for easy restoration

Q: I have several jr sysadmins who'd like to "play" w/2 rp units that I have as "spares". It's been several years since I took the N/Vpar RAIL course, but I seem to remember that there was some way to create a machine readable file that could be used to restore the npar config in a complex once someone has executed the "CC" cmd from the GSP command menu. As an aside, isn't there also something similar for restoration of the vpar config on any given NPAR as well.

Thanks.

JM
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: "Saving" rp8400 complex configuration info for easy restoration

Hi Joe,

you can use "CC" to restore the last config.

more details here:

http://www.docs.hp.com/en/5991-1132/ch06s03.html

For both (npar/vpar) the config isn't really difficult to create, so save and store the config in your documentation.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!