regarding nPar

[nPar]

can we make two partitions (nPar) in the following machine.

HP9000 – rp7400 system
HP PA-RISC 8700, 750MHz * 8Nos CPU
4 x Processor support module
4 x Memory carrier
32GB Memory Kit
(16 x 2GB memory set,)
2 x 146GB internal disk

[Sherif A. Louis]

Hello,
That info you posted isn't sufficient. It looks like you got it out of some document.
you have to know how many cells are installed on that server ( a max no. of 2 for that model )
if you have two cells then YES you can create up to two npars.

to know how many cells are installed you can log into the MP and issue a DF command then select c for cells.
or the PS command to see the cell status

[melvyn burnard]

No you cannot, an rp7400 is what used to be called the N4000, and it is NOT cell based

[Sherif A. Louis]

yes melvyn is right i didn't notice the 7400 thought it was a 7410.. sorry for the mistake

[Torsten.]

The system is not able to support nPars, because it is not cell-based, but (surprise!) it is able to support vPars versions 3 and 4.

[Sharma Sanjeev]

Hi

RP7400 is not a cell based server RP7420 is Two cell base Server so you can not create npar on rp7400

Regards
Sanjeev

[nPar]

so which rp model will support nPar

[Sherif A. Louis]

you got the rp7410, rp7420, and rp7440 which are 2 cell based systems
then you got the rp8400, rp8420 and rp8440 which are 4 cell based systems

[Torsten.]

... and superdome, of course.

The cell-based Integrities does as well.