HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

'remote' light on the server panel lit server RP8420

 

'remote' light on the server panel lit server RP8420

I would like to know what the default setting should be, and if the 'remote' setting needs to be turned on or off
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: 'remote' light on the server panel lit server RP8420

Shalom,

If there is something connected to the remote cable of the console splitter cable, the light is normal.

Connect to the console and ctrl-b and then run the command for vfp and make sure he lights match.

Also use SL to read the logs and that will clear the flashing attention light.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: 'remote' light on the server panel lit server RP8420

Hi,

if the remote access to the MP is enabled (telnet/ssh), the LED is on.
See the "EL" or "ER" command.
This may differ on different models.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!