HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

replace RTC Battery on rp4440

 
Kehad Snydewel
Frequent Advisor

replace RTC Battery on rp4440

i have to replace the RTC Battery on a rp4440 server. MP log entry "RTC_BATTERY_BAD".
OS on Server: HPUX 11.11

procedure i will follow:

1) shutdown OS
2) disconnect the power cord
3) access the system board.
4) Locate the battery and battery holder on the system board.
5) replace battery

Removing the battery clears the system date and time, and any passwords and customized system settings.

Q:if the system date and time change will the OS date and time change as well?

kehad



1 REPLY 1
Andrew Young_2
Honored Contributor

Re: replace RTC Battery on rp4440

Hi Kehad

Yes. The date and time are read from the RTC as part of the boot process.

I recommend you change the date and time on the RTC clock before you start up the server via the Management Console or GSP. You should be able to do this a few minutes after restoring power to the server.

Regards

Andrew Y
Si hoc legere scis, nimis eruditionis habes