HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

resetting GSP failed

 
SOLVED
Go to solution
Highlighted
Murat SULUHAN
Honored Contributor

resetting GSP failed

Hi

I cannot reset RP8420's MP/GSP.

[geronimo:root]/#stty +queryGSP GSP needs to be reset.
[geronimo:root]/#stty +resetGSP GSP reset failed.

Any idea ?

Best Regards
Murat
Murat Suluhan
3 REPLIES 3
Steven E. Protter
Exalted Contributor
Solution

Re: resetting GSP failed

Shalom,

If that does not work, thing about booting the system. This probably won't help because GSP controls the system but is almost not part of the system.

There could however be a hung process that is peventing the reset from working.

You can use mstm/cstm or xstm to check the hardware. If the hardware fails you need to call hardware and get them to replace the GSP card.

They have no moving parts, but they do fail once in a while.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Eric SAUBIGNAC
Honored Contributor

Re: resetting GSP failed

Hi Murat,


Acces the MP console trough Network (if you can !) then issue commande XD under CM Menu and reset master MP card.

If you can't acces the MP Console through Network you must connect directly at the serial port.

Regards
Murat SULUHAN
Honored Contributor

Re: resetting GSP failed

Hi

Fixed with reboot

Thanks for your responses

Best Regards
Murat Suluhan
Ya istiklal ya ölüm
Murat Suluhan