HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

resetting GSP password webconsole

 
WilliamSmith11
Super Advisor

resetting GSP password webconsole

Hi I have tried to reset the password in one GSP serie B I have not been possible.

I have access to the console .

I do Control B and request for the Admin user and password .

For user I set Admin
and for password I do everything , after that I press enter enter and appear the GSP prompt.

It seam to be other user different from Admin.

when I do and http://ipadress appear the login request , I set Admin
for the password I have try all and after three try my session is disconnected .
# cd /dev
# ll GSP*
crw------- 1 root sys 1 0x000080 Dec 3 2004 GSPdiag2
# stty +resetGSP < /dev/GSPdiag2

How I can do to recover the password ?

W.S
rperez
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: resetting GSP password webconsole

You don't need a password if you have console access. You are administrator and you are able now to set new passwords.
This can be done by typing SO (security options).
This may apply to most circumstances, but this depends on firmware and hardware revisions.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
WilliamSmith11
Super Advisor

Re: resetting GSP password webconsole

When I type SO from the local console (GSP console) , the responde is ,

This command can be only done by administrator , this tell me that I am not administrator.

Then what to do?

The GSP is at the last firmware available in the web

W.S
rperez