HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

resetting GSP password

 
Binukuttan VM_1
Frequent Advisor

resetting GSP password

hi all,

Any idea how to reset GSP password

all suggestions will be highly appreciated

regs

Binu
3 REPLIES 3
Robert-Jan Goossens
Honored Contributor

Re: resetting GSP password

Hi Binu,

if you run the command

# stty +resetGSP < /dev/GSPdiag1

from the console, a message like

"press 'p' within 5 sec to reset all user accounts"

should come up.

Regards,
Robert-Jan
Robert_Jewell
Honored Contributor

Re: resetting GSP password

Another method is to hold down the GSP reset button for several seconds. The same message will appear on the console.

The button location depends on the server. For instance the L class GSP reset button is located behind the PCI card cage cover. On this server this process can be a bit of a pain.

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Andrew Rutter
Honored Contributor

Re: resetting GSP password

hi,

there a few ways to do this depending upon the server.

Some servers have the gsp reset button visible on the back of the server and some like the L class have the button on the card inside the server. pressing this will put the gsp back to defaults as will removing the battery for a short while from the gsp card.

Or if its configured in unix then this can be done as already posted.
You will have to be near the console directly attached though to prees the key when prompted. This bit cannot be done remotely

Andy