routing tables

[marvin furuya_1]

I need to add a ip, submask to the routing table on a HP A500 system running mpe/ix 7.5. Is this possible and how do I do it.

thanks, Marvin

[Glenn A. Mitchell]

I'm not sure of the details, but you need to run NMMAINT.PUB.SYS while logged on as MANAGER.SYS (or someone with NM capability). Explore the various F-keys and you should be able to locate a panel to make the change. Validate and save any changes. You'll need to update the network (NSCONTROL or NETCONTROL command or both, I can never remember, with the UPDATE option).

Hope this helps.

Glenn

[Wim Korten]

Hi Marvin,

I think you need to modify the 'Neighbor Gateway Reachable Networks' via NMMAINT.

Checkout the following link:
http://docs.hp.com/en/36922-90040/ch06s11.html

Goodluck,
Wim

[Fred Metcalf]

The correct utility is NMMGR
Go to NS Configuration, then Guided Configuration, Config Network, Neighbor Gateways, etc.
Save and validate changes.
Then NETCONTROL command with the UPDATE option