HPE 9000 and HPE e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

routing tables

marvin furuya_1
Occasional Contributor

routing tables

I need to add a ip, submask to the routing table on a HP A500 system running mpe/ix 7.5. Is this possible and how do I do it.

thanks, Marvin
Glenn A. Mitchell
Valued Contributor

Re: routing tables

I'm not sure of the details, but you need to run NMMAINT.PUB.SYS while logged on as MANAGER.SYS (or someone with NM capability). Explore the various F-keys and you should be able to locate a panel to make the change. Validate and save any changes. You'll need to update the network (NSCONTROL or NETCONTROL command or both, I can never remember, with the UPDATE option).

Hope this helps.

Wim Korten

Re: routing tables

Hi Marvin,

I think you need to modify the 'Neighbor Gateway Reachable Networks' via NMMAINT.

Checkout the following link:

Limited by Technology
Fred Metcalf
Trusted Contributor

Re: routing tables

The correct utility is NMMGR
Go to NS Configuration, then Guided Configuration, Config Network, Neighbor Gateways, etc.
Save and validate changes.
Then NETCONTROL command with the UPDATE option
Missing MPE :-)