cancel
Showing results for 
Search instead for 
Did you mean: 

rp 7410

 
ketan_5
Valued Contributor

rp 7410

I have rp7410. Have 4 HDDS connected to local scsi controller( I believe). I want to spilt 2 HDDs for one partition and rest 2 for second partition. Pls guide how it can be done ? I do not have any raid controller. Only have two SCSI controller adapters with ine internal channel.

Also pls guide how to make two partition. There is no data on server

Thanks
3 REPLIES 3
Sunil Sharma_1
Honored Contributor

Re: rp 7410

Hi,

You have to make 2 HDD on each SCSI Channel.

Please check this doc

http://docs.hp.com/hpux/pdf/T1335-90018.pdf

Sunil
*** Dream as if you'll live forever. Live as if you'll die today ***
Alzhy
Honored Contributor

Re: rp 7410

I suppose you rwill just be soft partitioning thie rp7410 - ie. vPar? You will need complete separation of all your IO paths...
Hakuna Matata.
Joshua Scott
Honored Contributor

Re: rp 7410

do you have 2 cell boards and 2 core I/O cards?

do a man on the following:

parcreate

parmodify

parstatus

using hard 'nPartitions' will automatically split the drives two to each partition.
What are the chances...