rp2450 fault LED, and no console or GSP

[Stan Sieler]

P.s.,

the console port had seemed to not be working... that's resolved, too. The
SB25 connector isn't situated correctly,
having the bottom portion a bit too close to the edge of the knockout hole it's in.
As a result, an ordinary attempt at plugging
in the console cable appeared to work
but didn't actually make electrical contact.
By lifting up a bit on the connector, I was
able to make a solid connection and then
saw the console on my terminal (9600 baud).

Stan

[Stan Sieler]

P.s.,

the console port had seemed to not be working... that's resolved, too. The
DB25 connector isn't situated correctly,
having the bottom portion a bit too close to the edge of the knockout hole it's in.
As a result, an ordinary attempt at plugging
in the console cable appeared to work
but didn't actually make electrical contact.
By lifting up a bit on the connector, I was
able to make a solid connection and then
saw the console on my terminal (9600 baud).

Stan