rp2450 hangs on A6795A fiber card

[Timothy P. Jackson]

I have narrowed it down to that the boot was timing out while trying to scan the hardware. For some reason HP-UX could not figure out the Compellent San fast enough and it would time out. Why this is happening I don't know.

Finally we installed MtIOscan11i which allows multi threading for the hardware scan in the boot stage and now it boots just fine. It takes a little while but this is to be expected.

Here is the path for the doc's if anyone is interested

http://docs.hp.com/en/5991-0911/5991-0911.pdf


Thanks everyone for your help!

Tim