HPE 9000 and HPE e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

rp2470 disk address

Go to solution
Honored Contributor

rp2470 disk address

Do you have any document or self notes about rp2470 HDD I/O address schema / picture to describe which disk belonging to the which slot ?

I need to change a boot disk on customer rp2470 remotely , as far as I know rp2470 has two disks, one spare , one boot, I ve an ignite backup ,but don t know how to explain which disk is to be changed ?





P.S. This thread has been moevd from Workstations - Itanium-Based, hp9000, Visualize to Servers > HP 9000. - Hp Forum Moderator

Honored Contributor

Re: rp2470 disk address

You posted in the wrong board, so likely a moderator will move your question.


Anyways, here is what I think you are looking for:


Drive A (top disk) - 0/0/1/1.15.0

Drive B (bottom disk) - 0/0/2/1.15.0



Use the 'PA' command from the BCH menu to view what path is setup to be your primary boot disk.




Was this helpful? Like this post by giving me a thumbs up below!