HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp2470 problems

 
daniel smith_3
Frequent Advisor

rp2470 problems

rp2470-one or two(ive tried both, 1 with terminator) 750Mhz proc's. one 1GB kit of memory. two 18GB disk drives.
The system powers on fine, but nothing ever comes up on terminal! Leds seem like system is working fine. green power led is on...flashing green run led is flashing...and yellow attention led is flashing. I can get into gsp and everything looks fine in there. Ive tried different console cables, memory boards, and proc's. Next is main board. Any ideas before I do that?
thanks
dan
2 REPLIES 2
GK_5
Regular Advisor

Re: rp2470 problems

Can you login with telnet? Can you ping the box from other box?
IT is great!
Scot Bean
Honored Contributor

Re: rp2470 problems

The rp2470 (A-class) has several console ports, serveral ways to configure the console.
- remote LAN console
- local serial console

1. Are you connected to the 'right' console port?

By default, I believe the default console is set to 'hpterm'

2. Is your terminal emulating 'hpterm'?