HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp2470 server booting problem

 
Rajendra Prasad Yadav
Occasional Visitor

rp2470 server booting problem

I have changed to a new motherboard/logic boared with new GSP card and Power Supply for HP RP2470 server. After assembling the parts and switching ON the server, I AM ABLE TO ENTER INTO THE GSP but not further process.

Is there any problem with the logic board or Power supply.

After Switching on the server, I am getting the following vfp's immediately instead of flashing the RUN and ATTENTION LED's.


Front Panel LED's :

Run: Green
Attention: off
Fault: off
Remote : Amber
Power: Green

2 REPLIES 2
Luk Vandenbussche
Honored Contributor

Re: rp2470 server booting problem

Hi,

Are you sure that al the hardware is correctly installed?
I would double check my hardware
Kent Ostby
Honored Contributor

Re: rp2470 server booting problem

It may be working properly, but you may have the setting for the console set incorrectly.

http://www1.itrc.hp.com/service/cki/search.do?category=c0&prevQueryString=&mode=text&searchString=KBRC00013238&searchCrit=allwords&docType=EngineerNotes&dateRange=all&search.x=27&search.y=10
"Well, actually, she is a rocket scientist" -- Steve Martin in "Roxanne"