HPE Community
HPE 9000 and HPE e3000 Servers
1752754 Members
5434 Online
108789 Solutions
New Discussion

Re: rp3410 memory expandability

 
SOLVED
Go to solution
arkie
Super Advisor

‎08-13-2010 03:25 AM

‎08-13-2010 03:25 AM

rp3410 memory expandability

Hi All,

Need your help to clear this out:-

rp3410, P/N: A9954A supports upto 12 DDR registered ECC memory in PC2100 DIMMs. Supported DDR DIMM sizes: 256 MB, 512 MB, and 1 GB.

Query 1: Why is maximum memory capacity mentioned as 6 GB? Why not 12 DIMM Slots x 1 GB DIMMs = 12 GB supported?

Query 2: The HP 9000 rp3410 and rp3440 User Service Guide refers to models A7136A (which supports DIMMs in pairs) and A7136B (which supports DIMMs in quads). Nothing is mentioned about the A9954A

Query 3: Will the A9954A support 2 x 512 MB with only DIMMs in socket 0A and 0B?

Thanks in advance
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎08-13-2010 05:00 AM

‎08-13-2010 05:00 AM

Solution

Re: rp3410 memory expandability

See http://h18000.www1.hp.com/products/quickspecs/12036_div/12036_div.html

"...
1 GB option consists of 4Ã 256 MB DIMMs, and 2 GB option consists of 4Ã 512 MB DIMMs..."

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
arkie
Super Advisor

‎08-14-2010 01:46 AM

‎08-14-2010 01:46 AM

Re: rp3410 memory expandability

Hi Torsten

Thanks again! it will support 2 x 512 MB DIMMs. So the quads requirement was w.r.t. 256 MB DIMMs only, before 12-8-2004.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.