HPE Community
HPE 9000 and HPE e3000 Servers
1753470 Members
5082 Online
108794 Solutions
New Discussion юеВ

Re: rp3440 and A6150A

 
Sean Penn
New Member

тАО07-05-2006 07:36 AM

тАО07-05-2006 07:36 AM

rp3440 and A6150A

Hi,
We have 2 rp3440's and bought the A6150B video kits to have a KMV-able setup.
One of the cards is the A6150A model and the setmon command doesn't seem to work on it. It will display the 4 modes with the setmon -r command but the setmon -s 2 won't set the resolution. Is there any work around short of having to replace the card?

Sean
0 Kudos
3 REPLIES 3
Steven E. Protter
Exalted Contributor

тАО07-05-2006 08:00 AM

тАО07-05-2006 08:00 AM

Re: rp3440 and A6150A

Shalom,

Probably not.

It seems those cards are probably not supported. An HP integrator should have told you that.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Torsten.
Acclaimed Contributor

тАО07-05-2006 08:10 AM

тАО07-05-2006 08:10 AM

Re: rp3440 and A6150A

Don't know about the "A" version, see

http://www.hp.com/products1/servers/rackoptimized/rp3400_series/supplies.html

it mentioned only the A6150B (without the USB card!).

But this page says even the "A" card is running with your server

http://www.hp.com/products1/serverconnectivity/misc/graphics/specifications/index.html

Why not place a support call?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Sean Penn
New Member

тАО07-12-2006 10:47 AM

тАО07-12-2006 10:47 AM

Re: rp3440 and A6150A

I found my problem. Permissions on / where not correct changed to 555 and card came up. Website starts off talking about the a but by the bottom of the page it is referencing the B. Thanks for the suggestions!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.