HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp3440 and A6150A

 
Sean Penn
Occasional Visitor

rp3440 and A6150A

Hi,
We have 2 rp3440's and bought the A6150B video kits to have a KMV-able setup.
One of the cards is the A6150A model and the setmon command doesn't seem to work on it. It will display the 4 modes with the setmon -r command but the setmon -s 2 won't set the resolution. Is there any work around short of having to replace the card?

Sean
3 REPLIES 3
Steven E. Protter
Exalted Contributor

Re: rp3440 and A6150A

Shalom,

Probably not.

It seems those cards are probably not supported. An HP integrator should have told you that.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: rp3440 and A6150A

Don't know about the "A" version, see

http://www.hp.com/products1/servers/rackoptimized/rp3400_series/supplies.html

it mentioned only the A6150B (without the USB card!).

But this page says even the "A" card is running with your server

http://www.hp.com/products1/serverconnectivity/misc/graphics/specifications/index.html

Why not place a support call?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sean Penn
Occasional Visitor

Re: rp3440 and A6150A

I found my problem. Permissions on / where not correct changed to 555 and card came up. Website starts off talking about the a but by the bottom of the page it is referencing the B. Thanks for the suggestions!