HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp3440 iLO management setup

 
SOLVED
Go to solution
Ratzie
Super Advisor

rp3440 iLO management setup

We have a new rp3440 with iLO management. I have never used this, and would like to set this up so I can install HP 11.11.
I can not seem to find and docs on configuring this, as well as what is needed.
I would like to use the LAN base setup. But, if I have to I will use the DB25 connection.
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: rp3440 iLO management setup

This should help:

http://docs.hp.com/en/5991-6006/index.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tim Nelson
Honored Contributor

Re: rp3440 iLO management setup

Connect with serial cable to initiate the setup.

#>CM
#>LC
Follow prompts to turn off DHCP, configure IP, GW, mask.
configure hostname

Use security option to change the default password of Admin for Admin and Oper user to something else.
Ratzie
Super Advisor

Re: rp3440 iLO management setup

Awesome docs