HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp4440 connection to SC10

 
SOLVED
Go to solution
unixdaddy
Trusted Contributor

rp4440 connection to SC10

is it possible to connect rp3440 or rp4440 to FC60 controller (which is then connected to a couple of SC10 enclosures)?

P.S. I always assign points for 2 reasons

1) people take the time to answer my questions
2) someone else who is looking for the answer later will be able to see which response was correct.

keep the faith.
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: rp4440 connection to SC10

Do you want to connect to the SC10 or the FC60?

This is not clear to me, because the question is different from the subject.

Anyway, yes in both cases - you need to use the appropriate HBAs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
unixdaddy
Trusted Contributor

Re: rp4440 connection to SC10

Sorry, I want to connect the rp3440 or rp4440 to the FC60 controller the fc60 controller is then attached to a couple of SC10 enclosures. This enables us to configure LUNs in various raid configurations. Do you happen to know what the HBA would be to connect server to FC60?

regards
Highlighted
DCE
Honored Contributor

Re: rp4440 connection to SC10


You should be able to use A6826A cards to connect to the FC 60.
unixdaddy
Trusted Contributor

Re: rp4440 connection to SC10

thanks I'll try to confirm that with HP. As promised I've assigned points, any further comments are welcomed. I'll wait a little while before closing this thread.

keep the faith