rp4440 power on/off question

[Joe Short]

I have a new rp4440 server. When powering it on or off, it does not respond to the power button on the fron panel. The only way I can cycle the power on or off is through the MP, using the PC command. IS there a setting that will allow me to operate the power button for this purpose>

[Zygmunt Krawczyk · Accepted solution]

Hi Joe,

to power off the rp4440 server, shutdown the OS and press the power button and hold at least 5 seconds.

To power on the server, simply press the power on button.

Regards,
Zygmunt

[Joe Short]

Boy, do I feel like a dope.

Thanks.

[Joe Short]

Thanks