rp5405 model

[Camel_1]

Hi there,

How can I check the available PCI slot by command in server model rp5405 without physical access the server.

Thanks

[Helen French]

rp5405 system has a total of 10 PCI I/O slots available. To find out number of avaiable slots, run either one of this command and look how many are currently occupied:

# print_manifest (very detailed and structured information)
# ioscan -fn
# cstm (map command on the prompt)

For eg: On display, if it shows 3 I/O (SCSI, Network card etc) cards currently occupied, you will have 7 slots free.

[vofsky]

Hi,as far as I know some model of L-Class do not support 10 slots.Do rp5405 support all slots too like rp5470?

[Joshua Scott]

vofsky,

yes, the rp5405 supports 10 PCI slots.

[Alzhy · Accepted solution]

Simon,

Many folks don't know this yet but you can use "rad -q" on your 11.11 system...

It will show you the actual PCI slots vis a vis the H/W path... ioscan -kfn will show you what are on the H/W paths...


HTH.

[Camel_1]

rad -q is cool ....

Thanks all,

Simon