rp5405

[Camel_1]

Hi there,

Is this model support HW partition or vPar? If yes what is the min hw requirement.

Thanks a lof.

Simon

[Uday_S_Ankolekar]

RP models supports VPAR

Look for more here

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000064900686
-USA

[Bernhard Mueller]

Acc. to my notes you need at least an rp5470 (L3000) I doubt the rp5405 would be supported.

Regards,
Bernhard

[Bernhard Mueller]

Simon,

good news: the latest order and config guide *does* list the rp5405

http://docs.hp.com/hpux/onlinedocs/1705/oc.pdf

download for further HW requirements

Regards
Bernhard

[Jeff Schussele]

Hi Simon,

Yes the rp5405 does indeed support vPars. But you must run 11i & the system firmware must be up to date. Main HW requirement is that there must be enough cards for *each* partition to do it's thing. There is NO sharing in the vPar environment & that includes disks, tapes, DVD drives, NICs, etc.

Rgds,
Jeff