HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp5450 CPU upgrade

 
Ronnie Soderquist_1
Occasional Visitor

rp5450 CPU upgrade

Does anyone know the settings on SW1 for upgrading a A5191B from 440mhz to 550mhz?
4 REPLIES 4
Robert_Jewell
Honored Contributor

Re: rp5450 CPU upgrade

The following should work for you:

OFF OFF ON OFF ON
1 2 3 4 5


-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!
Thayanidhi
Honored Contributor

Re: rp5450 CPU upgrade

Hi,

Make sure your system board revision is "B".
Revision "A" supports 360 & 440Mhz cpu.

Revision "B" supports all cpus.

Settings are as mentioned by Bob.

Regards

TT
Attitude (not aptitude) determines altitude.
Highlighted
Ronnie Soderquist_1
Occasional Visitor

Re: rp5450 CPU upgrade

Thanks for the quick responses. I havce a rev 'B' board installed and used the following SW1 settings.....ON OFF OFF ON ON. This works, since I have benn running it since Thursday. The CPU's do show as 540Mhz. Thanks all again!!
Ronnie Soderquist_1
Occasional Visitor

Re: rp5450 CPU upgrade

set the SW1 settings at ON OFF OFF ON ON, and this worked also.