HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp5470= S1, S2, S3 setting

 
SOLVED
Go to solution
ANNE_25
Occasional Advisor

rp5470= S1, S2, S3 setting

I KNOW THAT THE S3 SWITCH IS THE CPU SPEED SETTING BUT THE S1 AND S2 I'M NOT EXACTLY SURE AND I WOULD RATHER THEM BE SET CORRECTLY PRIOR TO TESTING THE SYSTEM.
S1 IS LOCATED BESIDE CPU0
S2 IS LOCATED NEXT TO THE PROCESSOR MODULE

THANKS FOR ANY INFORMATION!
"People Would Rather Be Ruined By Praise Than Saved By Criticism!"
2 REPLIES 2
Michael Steele_2
Honored Contributor

Re: rp5470= S1, S2, S3 setting

This is the best I can find, HP's CPU installation Guide. It makes no reference to these switches.

http://www.docs.hp.com/en/A5191-96022/ch01s02.html

Support Fatherhood - Stop Family Law
Bernhard Mueller
Honored Contributor
Solution

Re: rp5470= S1, S2, S3 setting

Anne,

S1 is NVRAM clear, switch 1 should be on, off means clear NVRAM, 2 is not used

S2 is actually processor speed, there should be a few on and a few off, depending on CPU

S3 is processor power, normally all off

HTH
Regards,
Bernhard