HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp5470 console connection problems - no response

 
SOLVED
Go to solution
j kubler
Frequent Advisor

rp5470 console connection problems - no response

To all;
Trying to get attached to an rp5470 console. I moved the W cable and connected to the console connection. Got a 9 pin cable from Radio Shack and latter found another 9 pin cable in the data center and put a gender changer on it. Using my laptop that I know works on my hp-ux system I still couldn't get any prompt. Looking at the doc I tried several speeds and still got no response. Not even garbage. Any thoughts??
Thanks,
Jeff Kubler
3 REPLIES 3
Kenan Erdey
Honored Contributor
Solution

Re: rp5470 console connection problems - no response

Hi,

try with 9600 baud, if not try to reset the management console.

Kenan.
Computers have lots of memory but no imagination
Sherif A. Louis
Valued Contributor

Re: rp5470 console connection problems - no response

Hi Jeff,
Please make sure that cable u got is a null modem serial cable and not a straight serial cable.
Sharma Sanjeev
Respected Contributor

Re: rp5470 console connection problems - no response

Hi Jeff

In W cable there are three connections
one is Console
Second is Modem third some hing else
Make sure that you have connected to Console
and use Hyper terminal fo connection
Even if you are not getting response try to telnet MP from Network and check.

Regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE