HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp7410 - PDH NVRAM and I/O card NVRAM

 
SOLVED
Go to solution
Krishna Prasad
Trusted Contributor

rp7410 - PDH NVRAM and I/O card NVRAM

I am getting the following message when I interupt the boot and do a search. I am attempting to boot off of a DDS Ignite tape.

PDH NVRAM and I/0 card NVRAM SCSI parameters do not match for path 1/0/0/3/1 search aborted. The SCSI parameters for this card must be corrected from the BCH Service menu.

I found this error in Technical Knowledge base Documunt ID 4000035257. It stated to be a known problem ( actually refering to a DVD but virtualy same error)

The only know fix was to install a second device so that both cells saw the same device.

This is %#&## I only need and want one DDS drive - the only purpose I even want one is to boot an Ignite tape if ever needed.

Before I call the response center
Does anyone know of "real" fix for this?
Positive Results requires Positive Thinking
2 REPLIES 2
Krishna Prasad
Trusted Contributor

Re: rp7410 - PDH NVRAM and I/O card NVRAM

This got me to where I needed to be. I had to change all the setting to auto for all the SCSI devices connected to the cell.
Positive Results requires Positive Thinking