HPE 9000 and HPE e3000 Servers
1748003 Members
4601 Online
108757 Solutions
New Discussion юеВ

rp7410 enabling chassis0

 
SOLVED
Go to solution
mase_2
Advisor

rp7410 enabling chassis0

Hi

I got a rp7410 server with 2 cell boards. Cell board on slot0 is down and removed. So I started it with cell board on slot1. Now I am not able to access IO slots on chassis0. Any work around to enable them.

thanks
2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: rp7410 enabling chassis0

The IO is directly connected to the cell - no cell = no IO.
Workaround: install the cell board again.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mase_2
Advisor

Re: rp7410 enabling chassis0

thanks....i will wait for cell board.