cancel
Showing results for 
Search instead for 
Did you mean: 

rp7410

 
Torsten.
Acclaimed Contributor

Re: rp7410

Did you specify to boot vmunix?
What was your boot command?

Don't interact with ISL, just let it boot from CD.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
bagek
Frequent Advisor

Re: rp7410

i used hpux /stand/vmunix
bagek
Frequent Advisor

Re: rp7410

I let it boot from the dvd without any interaction and it came up fine. Thanks for all your help.
bagek
Frequent Advisor

Re: rp7410

thanks for he help loading HPUX. I have configured a VA7110 for additional storage. the system claims it ok. my problem now is loading armdsp. does it reside on one of the CD's HP sent me? thanks. jim
Torsten.
Acclaimed Contributor

Re: rp7410

You can get commandview sdm from www.hp.com.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Torsten.
Acclaimed Contributor

Re: rp7410

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=30591〈=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18964&prodSeriesId=64112

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!