cancel
Showing results for 
Search instead for 
Did you mean: 

rp7410

 
SOLVED
Go to solution
Jon Steele
Valued Contributor

rp7410

could someone tell me how to enable pci slots on the 7410?I have one up and running but it does not see the base scsi card/nic card.everything is powered on the pci backplane is powered on but it does not see the card.I have tried several working scsi cards and it does not see any of them.

Thanks for your help
Jon
3 REPLIES 3
Michael Steele_2
Honored Contributor
Solution

Re: rp7410

Hi Jon. You know I've got an older brother named Jon who lives in the East Bay. Spells his name the same way too. Mr. J.R. Steele. JR for short.

Here's the user guide for the rp7410. Refer to the Chapter on Repair and Replacement. Can you clarify if you're replacing the MP/SCSI board and the backplane? I'd think the MP would be hot pluggable board and firmware level sensitive. Else, refer to around page 106 for the replacement backplane procedure.

http://docs.hp.com/en/A6752-96008/A6752-96008.pdf

Support Fatherhood - Stop Family Law
Jon Steele
Valued Contributor

Re: rp7410

That is wierd.Hardly anyone spells Jon this way.Thanks for your help.

Jon
Jon Steele
Valued Contributor

Re: rp7410

Thanks