HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp7420 Shows HW Deconf

 
Muthyala
Frequent Advisor

rp7420 Shows HW Deconf

Hi

I have replaced the faulty memory with new one i get HW Deconf under BCH.I even enable it using the "DimmDealloc" command also cleared PDT tables.This is the o/p i get

Service Menu: Enter command > DimmDealloc 0

CELL MEMORY INFORMATION

Memory Information for Cell: 0 Cab/Slot: 0/ 0

---- DIMM A ---- ---- DIMM B ----
DIMM Current DIMM Current
Echelon Size Status Size Status
------- ------ ---------- ------ ----------
0 4096MB Active 4096MB Active
1 4096MB Active 4096MB Active
2 4096MB HW Deconf 4096MB HW Deconf
3 4096MB Active 4096MB Active
4 --- ---
5 --- ---
6 --- ---
7 --- ---

Cell Total Memory: 32768 MB
Cell Active Memory: 24576 MB
Cell Deconfigured Memory: 8192 MB


Can any one tell me how to enable this memory.

TIA
Sri
2 REPLIES 2
Ron Irving
Trusted Contributor

Re: rp7420 Shows HW Deconf

Good morning!!

First, I would power down, reseat the offending DIMM, and power up to PDC again, and check from there.

Hope this helps!!

Ron
Should have been an astronaut.
Ron Irving
Trusted Contributor

Re: rp7420 Shows HW Deconf

Hi again!!

Also check that the memory is the same part # as the other memory in the system. Some systems are VERY 'part-particular'

Ron
Should have been an astronaut.