HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rp8400/rp7410 failed to boot ignite 11iv1

 
Frank Zimniewicz
Occasional Advisor

rp8400/rp7410 failed to boot ignite 11iv1

Hi,

while installing a few rp8400 and rp7410 Servers with 11iv1 two units could´t reach the ignite prompt.
After choosing the the 11iv2, the systems comes up without any problems.
The "bad" servers had the following conifg:

RP8400
1x 875MHZ
1x 2GB

Date Code:
Cellboard A8-4335 (4346)

++++++++++

RP7410
1x 750MHZ
1x 2GB

Date Code:
Cellboard A8-4335 (4336) and also failed with
Cellboard A8-4328 (4332)

Firmware revision on both servers are up to date.

I think it must be a Hardware / Firmware problem, because I try tho install with different medias and via ignite server...

Hopefully someone had have such a problem and knows how to fix it.

Thanks a lof for your answers.
Frank