HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2600 hp server and DL380 hp server racking

 
SOLVED
Go to solution
guillermas
Occasional Contributor

rx2600 hp server and DL380 hp server racking

Hi,

Please, It's possible to rack an rx2600 hp server and a DL380 hp server in a "zero 5 cabinet" (19") of MERIDIAN Company ?
If yes, can you give me the rack mount kits necessary to process ?

Thanck for your answer.

Regards.
4 REPLIES 4
Andrzej Kowalik
Honored Contributor

Re: rx2600 hp server and DL380 hp server racking

Maybe you find something here:
http://www.racksolutions.com/hp/index.html
regards,
Andrzej
guillermas
Occasional Contributor

Re: rx2600 hp server and DL380 hp server racking


Hi,

Thank for your reply but I know this link, there is nothing for my problem.

Regards.

Michel
Highlighted
Thayanidhi
Honored Contributor

Re: rx2600 hp server and DL380 hp server racking

Mostly HP Racks have round holes and other racks has Square holes. If you talking about HP and COmpaq only, then there may be diffrent rack mounting kits available. For third party racks (In your case) you have to check up with rack vendor only.

Regds

TT
Attitude (not aptitude) determines altitude.
Ted Buis
Honored Contributor
Solution

Re: rx2600 hp server and DL380 hp server racking

Contact Meridian. Wrightline and Chatsworth typically have rack kits for their racks.

Cabinet must support front to rear air flow.
(No solid front or rear doors)
Anti-tip protection
Front and rear access and cable strain relief are needed.
Mom 6