HPE 9000 and HPE e3000 Servers
1752613 Members
4931 Online
108788 Solutions
New Discussion юеВ

Re: rx4440 diagnostic leds

 
Luis Lugo
Occasional Contributor

rx4440 diagnostic leds

I need the diagnostic leds of the rx4440 or rx4640 servers, thanks.
3 REPLIES 3
Sameer_Nirmal
Honored Contributor

Re: rx4440 diagnostic leds

Please refer the following link for rx4440
for the information you are looking for.

http://docs.hp.com/en/rx4640_ops/rx4640_ops.pdf
You can see the information about QuickFind Diagnostics Panel LEDs to dignose the hardware problems. Moreover there are I/O baseboard LEDs as well to troubleshoot its problem.

Are you facing some problem?

Luis Lugo
Occasional Contributor

Re: rx4440 diagnostic leds

I don't have problem with the server, but somtimes in boot process one of the leds turn on red, but I don't know what is the problem , because is occur sometimes only.

I want know if you have a manual of basic troubleshooting to C8000 server, I want to up the Lan but I know the command to up that, thanks .
Bill Hassell
Honored Contributor

Re: rx4440 diagnostic leds

The C8000 runs a Unix operating system called HP-UX and after you login as root, you will use a program called sam to setup the LAN. It will be helpful to bookmark http://docs.hp.com for manuals.


Bill Hassell, sysadmin