HPE Community
HPE 9000 and HPE e3000 Servers
1753716 Members
4716 Online
108799 Solutions
New Discussion юеВ

shifting memory modules between L-class

 
SOLVED
Go to solution
T G Manikandan
Honored Contributor

тАО11-28-2002 02:52 AM

тАО11-28-2002 02:52 AM

shifting memory modules between L-class

I am planning to shift some DIMM pairs from 9000/800/L2000-44 to 9000/800/L2000-36.

Will it be okay?
Another question is that I have read somewhere that the memory slot numbers 4a/b,5a/b..7a/b are disabled only 0a/b,1a/b,2a/b,3a/b are enabled.Is that true?

Thanks
0 Kudos
2 REPLIES 2
Stefan Farrelly
Honored Contributor

тАО11-28-2002 03:16 AM

тАО11-28-2002 03:16 AM

Solution

Re: shifting memory modules between L-class


No problem. Moved lots around from L to L or L to N or N to L. All memory slots are enabled.
Im from Palmerston North, New Zealand, but somehow ended up in London...
Vincent Farrugia
Honored Contributor

тАО11-28-2002 06:19 AM

тАО11-28-2002 06:19 AM

Re: shifting memory modules between L-class

Hello,

Memory shifts works fine. Just make sure you put the highest first (0a 0b) and in pairs.

Also, the 4a 4b - 7a 7b are disabled on the L1000 only. They are enabled on the L2000.

HTH,
Vince
Tape Drives RULE!!!
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.